LiftShow
The heavy machinery marketplace.

LiftShow

Knowledge Base: Equipment and Masts

Equipment types: start with the task

Counterbalance forklifts handle and stack loads; reach trucks serve high racks and restricted aisles; stackers place pallets; tow tractors pull load carriers. Indoors, assess local exhaust and ventilation. Outdoors, check ground conditions and gradients. Load weight and dimensions matter in every setting. A conventional diesel forklift is not automatically a rough-terrain truck. The linked electric and diesel listings provide a starting point; confirm suitability against the actual workplace.

Related product: HELI 2.5-ton Diesel Forklift
Related product: Heka 2.5-ton Electric Forklift

Pallet truck or stacker: transport versus stacking

A pallet truck moves pallets close to floor level: HELI lists a lift height of only 145 mm for its CBD35 range. A stacker places pallets at height, with capacity and lift options varying by model. Check pallet openings and bottom construction, support-leg clearance, fork length, aisle width and residual capacity at height. Equal rated capacities do not mean interchangeable duties. These equipment families differ from the counterbalance forklifts currently listed in our shop.

Reach trucks and order pickers in high-bay warehouses

A reach truck handles pallet loads in racks; an order picker supports picking individual items to assemble orders. HELI’s G2 sit-down reach-truck table lists 8.5–12.5 m lift heights across different variants, not every truck. Match the exact model to rack height, residual capacity, working aisle width, floor quality and operator visibility. Raising an operator requires purpose-designed equipment and the manufacturer’s procedures; ordinary forklift forks are not a personnel platform.

Two-stage and three-stage masts: clearance and free lift

Two-stage and three-stage describe mast sections; three stages alone do not guarantee full free lift. For doorways, containers and low ceilings, request closed mast height, extended height, free lift and the capacity chart separately. Our current diesel listings specify two-stage 4.60 m masts, the Heka electric listings specify three-stage 4.5 m masts, and some dual-fuel listings use three-stage masts. Lift height alone does not establish clearance or capacity at maximum height; confirm every dimension in the exact truck’s specification sheet.

Related product: HELI 2.5-ton Diesel Forklift
Related product: Heka 2.5-ton Diesel Forklift

Rough terrain and telehandlers: when specialist equipment is needed

On uneven ground, tire design, ground clearance, permitted gradients and stability matter. A telehandler’s telescopic boom provides forward reach and can place loads beyond obstacles. Allowable capacity changes with boom extension, so use the load chart for the actual configuration. Choose between a conventional forklift, rough-terrain truck and telehandler around the route and final load position. The diesel models currently in our shop should not be treated as telehandlers or rough-terrain trucks merely because they use diesel.

Tow tractors and heavy forklifts: read capacities correctly

A tow tractor’s towing weight and drawbar pull are different from lifting capacity. HELI lists them separately in kilograms and newtons. Trailer trains require assessment of couplings, brakes, gradients and the route. A heavy forklift lifts loads, and its rating is tied to a specified load centre; HELI’s 20–46 t range uses a 1,200 mm load centre in its table. These figures must not be applied to the 2.5 t and 3.5 t shop models.

Back to the Knowledge Base

Stay in touch

Contact LiftShow

Neyriz, Fars Province, Iran